453 TPMS Off

I haven’t tried this myself but I published this page for site user Rava and he kindly confirmed that it worked for him.

DDT4All Coding

You’ll have to get DDT4All running and connected to the car.

Parameters

You need to change 2 parameters. If you just change 1, you’ll just get a “programming error” warning message on the speedo.

Parameter 1

Window 1
Cluster/TDB
Cluster_X07

Window 2
[Cluster/TDB] Cluster_X07

Window 3
Ecran Configuration TdB
Config Vehicle

Main Window
TPMSPresent_CF

Change to Without TPMS
Click Einstein’s face

Click the yellow TPMS button on the right.

Parameter 2

Window 1
BCM/UCH
T4_VS_BCM

Window 2
[BCM/UCH] T4_vs_BCM

Window 3
TPMS System
TPMS System – Configuration

Main Window
TPMS_Presence_SSPP
TPMS_Receiver_Present

Set them both to 0.
Click Einstein’s face

Click the yellow Send button on the right.

Reset The Car

Disconnect the 12v battery earth for 5 minutes before reattaching.

The option for the TPMS reset will no longer be shown on the speedo.

Thanks to Rava for the last photo.