Mod Filter

What smart do I own?

Smartmods

smartmods
for all your modding needs, recommended by Evilution

Extraius Socius

S2smarts
S2smarts - the only garage personally recommended by evilution

Hashtag Wheel Bearing Change

Mod Details
PremiumYes Difficulty Mod ID1906 Creditevilution Cost£300 For#1 Linkhttps://evilution.co.uk/mod/hashtag-wheel-bearing-change.htm Copy to Clipboard

The page only currently covers the front “non driven” wheels bearings.

Front – Undriven

Undriven bearings are ones that don’t have a drive shaft going into them. Here is a 2 wheel drive Hashtag 3 Premium+. The front offside bearing was a bit noisy.

Loosen the wheel bolts with a 19mm socket. Check here for the tightening torque and the location of the security wheel bolt removal key.

Jack the car up. You really should add axle stands but if you don’t put any part of your body under the car, do you need to?

This gives you access to the hub and brakes.

Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.

Using Threadlock Fluid In High Torque Fixings

Theres a good argument that shows that threadlock fluid is ineffective when you use it on highly torqued fixings since the pressure pushes the fluid out from between the interacting threads. However, they come from the factory with threadlock fluid on and they hold your brakes on. It’s not going to hurt anything if you do add it.


23883 views

Print