Mod Description
If you have bent a wishbone in a crash or the bushes are failing, fit a new wishbone.Mod Details
PremiumYes Difficulty![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![451 Fortwo 451 Fortwo](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/model6.png)
Loosen the wheel bolts, jack the car up and remove the wheel. Using an 18mm spanner and a Torx 40, remove the main ball joint pivot nut. This is the connection between the end of the wishbone and the bottom of the hub.
![](/wp-content/uploads/smartchassis/suspension/451/front/451sus12.jpg)
Use a ball joint splitter to push the ball joint thread out of the hub. (46Nm on refitting).
![](/wp-content/uploads/smartchassis/suspension/451/front/451sus13.jpg)