Mod Details

PremiumYes Difficulty Mod ID790 Creditevilution Cost£A lot For Linkhttps://www.evilution.co.uk/mod/451-heated-seat-retrofit.htm Copy to Clipboard

There is an easy way and a less easy way to retrofit heatet seats to your 451. It really depends on the year your smart was made. From around 2008 to 2010, smart started to include all the wiring for the heated seats so all you have to do is plug in a few things. After that, they refreshed the interior and started cheating out so you may not have the connections. I don’t have your car so maybe use your eyes and check.

How Do I Know If I Have The Wiring?

Simple, have a look at the following info and check under the seats for the heated seat wires (white connection) and look under the dashboard for the relay base.

I Have The Wiring So Please Continue

Here are the non heated Pulse seats, they are nice, half fake leather and material but they aren’t as nice as the Brabus leather seats I have.

Look under the seats and disconnect the connections. The white one is the heated seat connector which is plugged into a holder to stop it flapping about. The blue connector is the seat belt reminder circuit and the remaining connector will be yellow, red or pink (not shown below), this is the side airbag if you have them. When you have the side airbag disconnected, do not turn your ignition on unless you like error lights.