Mod Details
PremiumYes Difficulty![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![453 Fortwo/Forfour 453 Fortwo/Forfour](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/model8.png)
Removable JBL Sub Woofer Information
This is the sub that can be bought from smart (part numbers coming later with the other parts required).
![](/wp-content/uploads/smartsound/453/sub/subinfo1.jpg)
It’s a fairly compact bass box that can be fitted and removed from the left hand side of the boot.
![](/wp-content/uploads/smartsound/453/sub/subinfo2.jpg)
The speaker is 165mm in diameter. That’s 6.5 Imperial American freedom inches.
![](/wp-content/uploads/smartsound/453/sub/subinfo3.jpg)
With the speaker out, you can see that there is no amplifier. It’s just a speaker in a box no matter what some sellers say.
![](/wp-content/uploads/smartsound/453/sub/subinfo4.jpg)
The sellers may be confused by the 4 wires going into the box and think that 2 are for an amplifier. This is not the case. It’s actually a dual voice coil so it will play left and right through the same speaker.
![](/wp-content/uploads/smartsound/453/sub/subinfo5.jpg)
With a bit of work with a Dremel rotary tool, I think a larger speaker could be made to fit if you wanted.
![](/wp-content/uploads/smartsound/453/sub/subinfo6.jpg)
Fitting The Base Frame
The sub doesn’t just magically stay in place. There is no Velcro and no nails. We need to fit a mounting frame. Open the boot and remove the screw in the lower left hand side boot side trim.
![](/wp-content/uploads/smartsound/453/sub/fit1.jpg)
You’ll have to lift the lower flap cable to clear the lower panel so you can pull it away.
![](/wp-content/uploads/smartsound/453/sub/fit2.jpg)
It’s held in with a load of clips and tabs. Some break, some don’t.
![](/wp-content/uploads/smartsound/453/sub/fit3.jpg)
Now remove the screw in the upper section in the boot.
![](/wp-content/uploads/smartsound/453/sub/fit4.jpg)
Pull the boot rubber seal towards to so you can pull the plastic panel to the right…
![](/wp-content/uploads/smartsound/453/sub/fit5.jpg)
…enough so you can reach in and disconnect the boot light.
![](/wp-content/uploads/smartsound/453/sub/fit6.jpg)
Again, the panel is held in place with a load of clips and tabs. Pull the panel to the right to gain access.
![](/wp-content/uploads/smartsound/453/sub/fit7.jpg)