Hashtag 1 Headlight Alignment

Mod Details

PremiumNo Difficulty Mod ID1869 Creditevilution For Linkhttps://www.evilution.co.uk/mod/hashtag-1-headlight-alignment.htm Copy to Clipboard

If you open the bonnet, you’ll see 4 holes for headlight adjustment, but why so many?

The Hashtag 1 comes with 2 different types of headlight.

Adaptive – Cyberspark LED+ Matrix headlights. Fitted to the Launch, Premium, Pulse and Brabus Models.
Non Adaptive – Cyberspark LED. Fitted to the Pure, Pro and Pro+ Models.

The adaptive matrix headlights have 2 projectors and the non adaptive headlights have 3 projectors.

Adaptive LED Headlight Adjustment

Here is a brand new matrix headlight. You can see 2 adjusters.

Next to each adjuster is what they do and the direction you need to turn them. However, these marking are hidden when on the car.

The outside edge adjustment (number 1) is to adjust the beam up and down.

The inside edge adjustment (number 2) is to adjust the beam left and right.

You can use either a 6mm Allen Key or a Posi head screwdriver.

With the plastic trim covers in position, you just have adjustment holes.

Although this one doesn’t line up very well with the adjuster.

Non Adaptive LED Headlights

The non adaptive headlights have 3 projectors and therefore 3 adjusters.

1 – High beam left & right.
2 – Low beam left & right.
3 – Low beam up & down.

Again, you can use either a 6mm Allen Key or a Posi head screwdriver.

Driving Abroad

There is no need for any adjustment on either type of headlight. They create a flat beam and if you have the adaptive beam turned on, it’ll block the headlight beam from oncoming traffic no matter what side the vehicles are on.