Mod Description
Remove the Roadster speedo to change the LEDs or the dial faceMod Details
PremiumNo Difficulty![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-over.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-over.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/menu-normal-off.png)
![452 Roadster 452 Roadster](https://www.evilution.co.uk/wp-content/themes/evilution/images/evilution/model7.png)
Look under the steering wheel cowl, you will see 4 holes. Remove the Torx10 screws.
![](/wp-content/uploads/smartinterior/speedo/452speedo/452speedo1.jpg)
Lift the surround behind the speedo to remove it.
![](/wp-content/uploads/smartinterior/speedo/452speedo/452speedo3.jpg)
Split the upper and lower cowls and lift the speedo.
![](/wp-content/uploads/smartinterior/speedo/452speedo/452speedo2.jpg)
Lift the speedo and disconnect the wiring connection by pressing the back and swinging the locking arm over to unclip it. Never pull the connector by the wires.
![](/wp-content/uploads/smartinterior/speedo/452speedo/452speedo4.jpg)
Take the speedo and base from the car and flip it over to reveal the underside. Remove the 2 Torx10 screws and the speedo will be free from the base if required. If you want to remove the fabric/leather surround from around the speedo, it just pulls off. It is clipped in all around. Just lever and lift it off.